vyhledávání
Produkty
Speciální nabídka

ADATA SSD XPG SX300 128GB mSATA SATA3 MLC (čtení: 550MB/s; zápis: 505MB/s)

Neaktivní hlídací pes
Pro aktivaci hlídacího psa je třeba se přihlásit.
2177 Kč s DPH

1799 Kč bez DPH
Dostupnost: Skladem v eshopu
Part no.: ASX300S3-128GM-C
Výrobce: ADATA
Záruka: 3 měsíců
ADATA SSD XPG SX300 128GB mSATA SATA3 MLC (čtení: 550MB/s...
Produkt je zařazen:

Popis produktu:
The increasing demand for high-performance system storage device is easily met by the Premier Pro SX300 mSATA 6GB/sec solid state drive. With a SandForce

controller and 25nm (MLC) NAND Flash chips, the SX300 reaches random read and write speeds of up to 25,000/85,000 IOPS. When combined with the Sandy Bridge or Ivy

Bridge platforms, the SX300 can achieve amazing performance on both desktop and notebook systems. The implementation of optimized firmware in the SX300 results in

full utilization of the NAND Flash components, which translates to maximized storage capacity: a 7% increase over other solid state drives that use a SandForce

controller. This zero percent over-provisioning is implemented with no loss to performance or supported features, and can be realized only by 100% screening and

sorting of the NAND Flash.

With a SSD + HDD hybrid setup, the mSATA SSD acts as a cache drive instead of main storage. Using this configuration, systems can reach speed boosts comparable

to systems with SSDs as primary drive, while still enjoying the larger storage capacities of a mechanical hard drive.

The SX300 utilizes a SandForce controller with 25nm (MLC) NAND Flash chips. For the 256Gb model, transfer speeds are as high as 550MB/sec (read) and 505MB/sec

(write). Random read/write speeds reach 25,000/85,000 IOPS. For energy saving and environmental protection, the low power consumption of the mSATA SSD greatly

reduces electricity costs. When the SX300 and hard drive are used together in a hybrid configuration (SSD Caching), costs can be greatly reduced, with still

reaching nearly the speed performance of an SSD as primary drive. Compared to a sole mechanical drive, performance is improved by up to 64%.

The SX300 is small and light, measuring only 50.95 x 30 x 4mm. It is applicable to many motherboards on the market that have an mSATA slot, including Acer TM8481G

and MSI GT70. For more detailed information on compatible hardware, refer to the website of the relevant notebook manufacturer.

Specifications:
- Form Factor: Full-size mSATA
- Interface: SATA 6Gb/sec
- NAND Flash: Multi-Level Cell (MLC) NAND Flash Memory
- Controller: LSI SandForce SF-2281
- Dimensions: 50.95 x 30 x 4mm(L × W × T)
- Weight: 7g
- Operating Temperature: 0°C - 70°C
- Storage Temperature: -40 °C - 85 °C
- Shock Resistance: 1500G/0.5ms
- MTBF: 1,200,000 Hours
- ECC Recovery: Up to 55 bits correctable per 512-byte sector (BCH)
- Certification: RoHS, CE, FCC
- Warranty: 3 Years

Performance
- Read: 550 MB/sec.
- Write: 505 MB/sec.
- IOPS: Read 25,000/Write 85,000 (Maximum 4K Random Write)


Přes veškerou snahu zajistit co nejpřesnější popis a technické parametry produktů nemůžeme zaručit, že uváděná data odpovídají skutečnosti. Řada výrobců si vyhrazuje právo změny některých parametrů či vlastností bez předchozího upozornění. Potřebujete-li ujištění o určitých parametrech produktu nebo v případě pochybností, kontaktujte prosím svého obchodníka. Pozdější reklamace vlastností je zbytečnou komplikací pro obě strany.


Diskuze k ADATA SSD XPG SX300 128GB mSATA SATA3 MLC (čtení: 550MB/s; zápis: 505MB/s)
Diskuze k produktu: adata-ssd-sx300-128gb-msata-sata3-mlc není založena. Pokud chcete vložit nový příspěvek, je třeba se přihlásit nebo zaregistrovat.
Pokud chcete sledovat diskuzi emailem, je třeba se přihlásit nebo zaregistrovat.